Seats with high backrest SP-32

Seats with high backrest

Seat with high backrest, type SP-32, H=32 cm. The seat is made of injection molded polypropylene and has solid supporting structure with additional ribbed reinforcements under the seat. The double rear wall significantly increases the seat's resistance to vandalism. Water is drained through the opening in the middle of the seat. The seat has a recess for attaching a number plate. The rounded and smooth surface of the seat provides the viewer with comfort and safety of use.

The SP-32 seat is resistant to both high and low temperature, so that during the summer it does not deform during hot weather, while in winter it does not break under the influence of frost. It is also resistant to solar UV radiation and does not discolour.

It has the required certificates, confirmed by strength and non-flammability tests.
The seat is available in the following colours: red - RAL 3020, green - RAL 6032, yellow - RAL 1003, blue - RAL 5010. Other colours according to the RAL palette - available on a special request.

S32s Seat SP-32 with high backrest, mounted directly to the step

S32k Seat SP-32 with high backrest, mounted on the steel structure