This site uses cookies. You can change this in your browser settings (Privacy policy). close
Seat without backrest, mounted on the steel structure
  • Seat without backrest, mounted on the steel structure

Seat without backrest, mounted on the steel structure

S10k
VAT included

Plastic seats for tribunes and sports audiences SP-11, without backrest, hard to ignite, mounted on the steel structure

Quantity
mail_outline Ask a question

We offer a delivery service and assembly of seats on facilities that have auditorium with concrete steps. Depending on the type of steps, the seats are installed directly to the steps or to the steel structure. All elements of the steel structure are powder coated (indoor facilities - sports halls, gyms) or hot-dip galvanized (outdoor facilities - sports fields, stadiums).

Seats installed directly to the steps:


Seats installed on the steel structure:

Seat without backrest, mounted on the steel structure

Seat without backrest, type SP-11, H=11 cm - mounted on the steel structure. The seat is made of injection molded polypropylene. The seat structure is self-supporting, which allows mounting directly to the groundwork. The rounded and smooth surface of the seat provides the viewer with comfort and safety of use.

The SP-11 seat is resistant to both high and low temperature, so that during the summer it does not deform during hot weather, while in winter it does not break under the influence of frost. It is also resistant to solar UV radiation and does not discolour

It has the required certificates, confirmed by strength and non-flammability tests.
The seat is available in the following colours: red - RAL 3020, green - RAL 6032, yellow - RAL 1003, blue - RAL 5010. Other colours according to the RAL palette - available on a special request.

Seats on the structure, fixed to the riser:

Seats are bolted to the beam, which is attached to the riser, using special brackets. This type of fixing makes cleaning under seats easier, eliminating structural elements attached to the ground, which can be an obstacle during cleaning works.

Seats on the structure, fixed to the step:

Seats are bolted to the beam, which is attached to the step, using special supporting legs.

With the structure, the position of the seat relative to the pitch can be adjusted to provide the user with optimal visibility.

Solid hot-dip galvanized or powder coated structure ensures safe long-term use, and due to the use of high-class materials, the aesthetic qualities do not deteriorate over the years.

S10k

2 other products in the same category: